Cable Lugs

TINNED COPPER CABLE LUGS

Cable Lugs/Cable Terminal Ends are electrical connectors used for connecting or terminating electrical cables to electrical appliances, transformers, junction boxes, control panels, etc. Connectors are also used for joining two power cables together.   A lug has two ends, a tubular end through which cable is inserted and a flattened end which is bolted to the appliance or surface.  After cable insertion, the lug can be crimped with a crimping tool or soldered or welded.  Lugs comes in different sizes corresponding to cable size and sizes are marked on the palm area of the lug.  Suitable tool and die set is used to crimp them to cable or wire.  The lugs are usually made of copper or aluminium and comes in different sizes and current carrying capacities.  Proper care has to be taken and selection done according to low voltage or medium voltage requirements.

Flare Electricals lugs are made of high conductive copper seamless tubes.  These tubes are drawn and cut to required dimensions.  They are then annealed properly to make them soft, so that they do not crack during forging.  The annealed tubes are then forged and cut using power presses.  They are then tin plated to required micron thickness to prevent the copper lug from oxidation.

Flare Electricals is equipped with modern machinery and tool room to help design and develop lugs according to customer requirements.

Single Hole Cable Lugs

Single Hole Cable Lugs

Two Hole Cable Lugs

Two Hole Cable Lugs

Bell Mouthed Cable Lugs

Bell Mouthed Cable Lugs

long barrel ferrule

Short Barrel Ferrule

Long Barrel Cable Lugs

Long Barrel Cable Lugs

Four hole cable lugs

Four Hole Cable Lugs

long barrel ferrule

Long Barrel Ferrule

DIN 46235 Cable Lugs

DIN 46235 Cable Lugs